1 / 5
Everything Pressence Lite Busch Jaeger Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your Everything Pressence Lite mmWave Sensor tidy and mains powered underneath a Busch Jaeger Futur Linear Rocker
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 429
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I always wanted mmWave Motionsensors inside my house.
And I had several “blind switches” because of smart lights which have to stay on all the time so here's a (imho) really cool mount for your Everything Presences Lite.
Things to print:
- Just the “Halterung EPL” with your preffered filament ( I used some transparent PETG)
Things to buy:
- Buy yourself a high quality powersupply for flush monted sockets (I bought myself the 5v2A Scaleo systems AC/DC-Einbaunetzteil)
- Buy a Busch Jaeger Future Linear Rocker in the desired color
Preperation:
- Use a dremel to remove all bridges on the backside of the Busch Jaeger Rocker (everything has to be flat except the 2 rounded things in the middle and the 4 small edges on the sides)
- Solder two jumperwires to the pins 5V and GND
- Drill two small holes in your Busch Jaeger frame (3mm drill diameter) to locate the frame to the wall
Assembly:
- Connect your power supply to mains and the powersupply with WAGO clamps to your EPL
(Always turn off mains power before working - in other words: user your brain, be careful) - Insert your EPL into the bracket and mount everything inside the Busch Jaeger Frame.
To ensure a perfect fit for your rocker, I used two small strips of power Test tape
Add to HA
I won't go into detail here, everything has been described here:
https://everythingsmarthome.github.io/everything-presence-lite/