Replacement case for RTL SDR (R820T2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2-part replacement case for the RTL SDR (model R820T2) with provisions for antenna, LED indicator, and IR receiver
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 287
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 2-part replacement case for the RTL SDR (model R820T2). It has provisions for the external antenna, a light-pipe for the LED indicator, and 5× light-pipes for the IR receiver. It also has hexagonal cooling holes on the bottom.
My original case had become tacky from the original soft-touch rubber. So I set out to make a simple replacement one while retaining the original features.
Print each case half with the flat face on the print bed. No supports are required. Glue is required for assembly; just place a small drop on the corners to allow for possible future disassembly.
For the light-pipes, use a piece of clear filament cut flat on each end and of the appropriate length. Some drilling may be required to get a snug fit.