Replacement case for RTL SDR (R820T2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 2-part replacement case for the RTL SDR (model R820T2) with provisions for antenna, LED indicator, and IR receiver
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 71
- Makes
- 1
- Views
- 287
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a 2-part replacement case for the RTL SDR (model R820T2). It has provisions for the external antenna, a light-pipe for the LED indicator, and 5× light-pipes for the IR receiver. It also has hexagonal cooling holes on the bottom.
My original case had become tacky from the original soft-touch rubber. So I set out to make a simple replacement one while retaining the original features.
Print each case half with the flat face on the print bed. No supports are required. Glue is required for assembly; just place a small drop on the corners to allow for possible future disassembly.
For the light-pipes, use a piece of clear filament cut flat on each end and of the appropriate length. Some drilling may be required to get a snug fit.