1 / 4
Neptune 3 pro belt tensioners for 20 touth Idler — zdjęcie 1
1 / 4

Neptune 3 pro belt tensioners for 20 touth Idler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Belt tensioners for 20 tooth Idler

Ocena
4 / 5
Polubienia
5
Pobrania
34
Wydruki
0
Wyświetlenia
270
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I saw https://www.printables.com/model/550095-elegoo-neptune-3-pro-belt-tensioner-for-toothed-id but did not work for me, different idler.

So I made one, easier than modifying a stl file.

I use https://www.aliexpress.com/item/1005006190467022.html with 16mm long  and 5mm OD and https://www.aliexpress.com/item/1005003693896590.html 20 tooth bore 5mm.

Heat insert I used are 3x4x4OD

They fit perfectly in original covers.

I ran into a problem, since I replace my belt with gates one. they were a few mm longer than the original so the Y axis was bottoming out in the casing, I added a washer like in the picture to fix that. I did not want to change the original dimension except to fit the idler.

Tagi