1 / 4
Neptune 3 pro belt tensioners for 20 touth Idler — image 1
1 / 4

Neptune 3 pro belt tensioners for 20 touth Idler

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Belt tensioners for 20 tooth Idler

Rating
4 / 5
Likes
5
Downloads
34
Makes
0
Views
270
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I saw https://www.printables.com/model/550095-elegoo-neptune-3-pro-belt-tensioner-for-toothed-id but did not work for me, different idler.

So I made one, easier than modifying a stl file.

I use https://www.aliexpress.com/item/1005006190467022.html with 16mm long  and 5mm OD and https://www.aliexpress.com/item/1005003693896590.html 20 tooth bore 5mm.

Heat insert I used are 3x4x4OD

They fit perfectly in original covers.

I ran into a problem, since I replace my belt with gates one. they were a few mm longer than the original so the Y axis was bottoming out in the casing, I added a washer like in the picture to fix that. I did not want to change the original dimension except to fit the idler.

Tags