4 In a Row Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We decided to mash up the classic "4 in a row game" with a lamp and got this fun model! Sit with your friend and spin…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 204
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
We decided to mash up the classic "4 in a row game" with a lamp and got this fun model! Sit with your friend and spin the lamp shade to play!
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
.2mm
Infill:
15%
Notes:
-0.2mm layer height
-15-20% infill
-Supports needed for the base where the lamp will be seated
-Print the base
-I used this lamp cord:
Lamp Cord
-Print 21 red chips and 21 yellow chips
-To print with optimal clarity:
-.1mm layer height
-2 perimeters
-avoid crossing perimeters
-100% infill
-Aligned Rectilinear fill pattern
-0 top and 0 bottom layers
-Slow all speed to 20mm/s
-Print at a higher temp for PLA, I used 220 for mine
-Print on a smooth sheet or glass bed for best clarity
-I used the “print by object” setting and filled the bed with copies for the transparent filament
Category: Games