4 In a Row Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
We decided to mash up the classic "4 in a row game" with a lamp and got this fun model! Sit with your friend and spin…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 1
- Views
- 204
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
We decided to mash up the classic "4 in a row game" with a lamp and got this fun model! Sit with your friend and spin the lamp shade to play!
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
.2mm
Infill:
15%
Notes:
-0.2mm layer height
-15-20% infill
-Supports needed for the base where the lamp will be seated
-Print the base
-I used this lamp cord:
Lamp Cord
-Print 21 red chips and 21 yellow chips
-To print with optimal clarity:
-.1mm layer height
-2 perimeters
-avoid crossing perimeters
-100% infill
-Aligned Rectilinear fill pattern
-0 top and 0 bottom layers
-Slow all speed to 20mm/s
-Print at a higher temp for PLA, I used 220 for mine
-Print on a smooth sheet or glass bed for best clarity
-I used the “print by object” setting and filled the bed with copies for the transparent filament
Category: Games