1 / 7
Aqara U200 smart lock front plate & cover alternative — zdjęcie 1
1 / 7

Aqara U200 smart lock front plate & cover alternative

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple way to alternate the look of your Aqara U200 with a new front plate or cover

Ocena
5 / 5
Polubienia
18
Pobrania
222
Wydruki
3
Wyświetlenia
1878
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A simple way to alternate the look of your Aqara U200 with a new front plate or cover.

 

Printing tipps:

  • enable “Only one wall on first layer” in quality settings (Bambu Studio / Orca Slicer) for a cleaner look
  • center and then rotate the part 135° in x-axis for vertical print lines.
  • use a structured print sheet for a very nice looking first layer which hides the layer lines completely

 

Installation front plate:

Put the two bottom guides into the matching openings first and make sure the lower mid lower taps fits underneath the lower battery holding tap. Then gently apply light pressure around the sides from the bottom to the top to press the cover in. I advice to support the U200 from the back to avoid the smart lock from tilting on the profile cylinder.

 

Installation cover:

First remove the front plate and then gently put the cover on.

 

Downloads:

  • clean versions
  • cover version with Aqara logo as cutout
  • step files
  • multicolor .3mf files with Aqara logo for Bambu Studio / Orca Slicer

Tagi