HOBO U23-001 Pro v2 Solar Radiation Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solar Radiation Shield for Onset's HOBO U23 Pro v2 Temperature/Relative Humidity Data Logger and other small devices.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- GNU General Public License v3.0
Overall
Solar Radiation Shield for Onset's HOBO U23 Pro v2 Temperature/Relative Humidity Data Logger. You can install any small devices in it. e.g., SwitchBot Indoor/Outdoor Thermo-Hygrometer (https://www.switch-bot.com/products/switchbot-indoor-outdoor-thermo-hygrometer). I confirmed that this works as well as Onset's very expensive solar radiation shield (RS1).
The Onshape Document is available below.
https://cad.onshape.com/documents/b682a7956f903e31f9ca8ee6/w/25176f20d8459132a2a7558b/e/eb60c6558451cfcf0839d66a?renderMode=0&uiState=6698d31810e7e04019648b2b
How to make
- Print 2-3 for middle_plate and 1 for others
- I used white PolyLite ASA filament. I recommend using white ASA for outdoor durability.
- Stack them and fasten with 3 sets of m4 x 100mm screws and wing nuts.
Tips for printing
- Enable brim for avoiding warping
- 15% infill gives enough strength when printing with ASA
- Enable organic support for supporting the overhang at the insulok hole of base_plate.
