HOBO U23-001 Pro v2 Solar Radiation Shield
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Solar Radiation Shield for Onset's HOBO U23 Pro v2 Temperature/Relative Humidity Data Logger and other small devices.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 45
- Makes
- 0
- Views
- 380
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- GNU General Public License v3.0
Overall
Solar Radiation Shield for Onset's HOBO U23 Pro v2 Temperature/Relative Humidity Data Logger. You can install any small devices in it. e.g., SwitchBot Indoor/Outdoor Thermo-Hygrometer (https://www.switch-bot.com/products/switchbot-indoor-outdoor-thermo-hygrometer). I confirmed that this works as well as Onset's very expensive solar radiation shield (RS1).
The Onshape Document is available below.
https://cad.onshape.com/documents/b682a7956f903e31f9ca8ee6/w/25176f20d8459132a2a7558b/e/eb60c6558451cfcf0839d66a?renderMode=0&uiState=6698d31810e7e04019648b2b
How to make
- Print 2-3 for middle_plate and 1 for others
- I used white PolyLite ASA filament. I recommend using white ASA for outdoor durability.
- Stack them and fasten with 3 sets of m4 x 100mm screws and wing nuts.
Tips for printing
- Enable brim for avoiding warping
- 15% infill gives enough strength when printing with ASA
- Enable organic support for supporting the overhang at the insulok hole of base_plate.
