Cyclone Marble Machine drive cap for Lego Mindstorms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I printed @mroek's Cyclone triple track marble machine and loved it. However, being rather lazy I wanted an easier way…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 768
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed @mroek's Cyclone triple track marble machine and loved it. However, being rather lazy I wanted an easier way to operate the marble lift. So I replaced the drive cap with my own that has a Phillips' indentation at the top, thus allowing a Lego Mindstorms motor to drive it with ease.
mroek's Cyclone triple track marble machine:
http://www.thingiverse.com/thing:1340784
* IMPORTANT* Because the original STL for the marble machine was too large to print using my Dreamer, I printed the marble machine at90% scale. Therefore, this cap will ONLY fit a 90% scaled machine! You could try scaling this cap UP to 111% which might then fit the original scaled machine.
Here's my video of it in action:
Print Settings
Printer Brand:
FlashForge
Printer:
FlashForge Creator Pro
No
Supports:
No
0.2
Notes:
I printed this with the wide base on the print bed, and the drive shaft pointed vertically up.
* IMPORTANT*Because the original STL for the marble machine was too large to print using my Dreamer, I printed the marble machine at90% scale. Therefore, this cap will ONLY fit a 90% scaled machine!
Category: Mechanical Toys