Cyclone Marble Machine drive cap for Lego Mindstorms
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I printed @mroek's Cyclone triple track marble machine and loved it. However, being rather lazy I wanted an easier way…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 18
- Makes
- 0
- Views
- 771
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
I printed @mroek's Cyclone triple track marble machine and loved it. However, being rather lazy I wanted an easier way to operate the marble lift. So I replaced the drive cap with my own that has a Phillips' indentation at the top, thus allowing a Lego Mindstorms motor to drive it with ease.
mroek's Cyclone triple track marble machine:
http://www.thingiverse.com/thing:1340784
* IMPORTANT* Because the original STL for the marble machine was too large to print using my Dreamer, I printed the marble machine at90% scale. Therefore, this cap will ONLY fit a 90% scaled machine! You could try scaling this cap UP to 111% which might then fit the original scaled machine.
Here's my video of it in action:
Print Settings
Printer Brand:
FlashForge
Printer:
FlashForge Creator Pro
No
Supports:
No
0.2
Notes:
I printed this with the wide base on the print bed, and the drive shaft pointed vertically up.
* IMPORTANT*Because the original STL for the marble machine was too large to print using my Dreamer, I printed the marble machine at90% scale. Therefore, this cap will ONLY fit a 90% scaled machine!
Category: Mechanical Toys