1 / 1
Percussion Blocks, all of them, C to B — zdjęcie 1

Percussion Blocks, all of them, C to B

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

12 blocks 1 Octave Chromatic

Ocena
0 / 5
Polubienia
29
Pobrania
120
Wydruki
0
Wyświetlenia
488
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution

12 percussion blocks covering one octave.

I printed in Prusa PLA Galaxy Silver and with 5 perimeters and 100% infill, one block at a time. 

Tuning:  If you want to fine tune the blocks, let them first rest for a week after printing to allow the material to settle. 

  • To lower the frequency: Deepen the slot a little at a time. A hacksaw blade or the edge of a file is perfect for the job. 
  • To rise the frequency: Scrape off material near the end of the tongues, just a little at a time. I used a scissors, there are probably better tools for it, sandpaper should work.

 

Tagi