Google Pixel 8a
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Google Pixel 8a with emphasis on enhanced phone protection.
- Ocena
- 4 / 5
- Polubienia
- 17
- Pobrania
- 323
- Wydruki
- 1
- Wyświetlenia
- 1819
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The case includes cutouts for the side buttons, SIM card, microphone, speakers, and USB-C connector. There are circular openings with channels on the back for better heat dissipation.
IMPORTANT NOTES:
The bottom side of the model contained deformations after exporting to STL, which were successfully removed by increasing the thickness by 1mm. Therefore, after placing the model on the build plate, I recommend shifting the model 1mm downwards, which will trim it to the original value.
It is not very easy to remove the phone from the case once inserted, but it is possible - you need to open the case on multiple sides. So, be careful.
For the honeycomb effect, it is necessary to print with zero top and bottom layer height. For the vertical walls, I set the perimeter to 12. The chosen infill pattern is honeycomb with a density of 15%.