170x75 magnetic diamond hone plate holder with desk clamp (knife sharpener)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick holder I made for cheap 170x75mm diamond hone plates that you can find from various Chinese sellers.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 684
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a model that I made for sharpening knifes using cheap 170x75 diamond hone sharpening plates that you can purchase on aliexpress or similar sites.
It features a clamp that fits into a slot on the feet. The slots should be towards the middle of holder.
Print in whatever material you feel like, just make sure it's not warped.
Print 2x of the “feet” model
The magnets holds the plates stationary for an optimal sharpening experience.
Bill Of Materials:
5x3 round neodymium magnet x8
M3x16 countersunk M3 screw x6 (but honestly 4 is good enough)
170x75 Diamond hone plates (various grits)
