Altair Astro Autofocuser Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to mount an autofocuser to an Altair Crayford focuser
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Hi!
I was dissatisfied with the mounting of a Pegasus focuscube to my Altair Astro 200mm F5 scope as due to the curved profile, it was impossible to mount square , so have modelled an adapter to allow fixing of the autofocuser to a flat surface without needing to use any holes on the focuser.
Works with the focus cube, but I would imagine would also fit an EAF. I have also included 2 threaded insert holes on the top for mounting some cable management I'm yet to design.
I printed with 65% infill with PETG as I wanted it to be reasonably sturdy, but this is probably overkill
Additional materials:
- 12 x M4 Heat-set threaded inserts
- 4 x 30mm Countersunk M4 Bolts
- 4 x 20mm Countersunk M4 Bolts
- 4 x 16mm Countersunk M4 Bolts
I hope this helps someone else out there!