Altair Astro Autofocuser Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to mount an autofocuser to an Altair Crayford focuser
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Hi!
I was dissatisfied with the mounting of a Pegasus focuscube to my Altair Astro 200mm F5 scope as due to the curved profile, it was impossible to mount square , so have modelled an adapter to allow fixing of the autofocuser to a flat surface without needing to use any holes on the focuser.
Works with the focus cube, but I would imagine would also fit an EAF. I have also included 2 threaded insert holes on the top for mounting some cable management I'm yet to design.
I printed with 65% infill with PETG as I wanted it to be reasonably sturdy, but this is probably overkill
Additional materials:
- 12 x M4 Heat-set threaded inserts
- 4 x 30mm Countersunk M4 Bolts
- 4 x 20mm Countersunk M4 Bolts
- 4 x 16mm Countersunk M4 Bolts
I hope this helps someone else out there!