Voron 2.4 Nozzle Cleaning Brush
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As the title states, another nozzle cleaning brush for Voron 2.4.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 1110
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Another nozzle cleaning brush for Voron 2.4. I couldn't find anything that fit well enough and was sturdy enough. I think my printer is tuned pretty well so if you have assembly issues please reference Ellis's tuning guide and see if that corrects them. Standard Voron print settings.
It's made to fit these brushes. I also have PEEK bed screws with the 10mm spacers but should clear almost anything that also allows Nevermore to be under the bed.
I used M3x6 screws and hammerhead nuts to secure it. M3x8 screws may work but I didn't test them.