Axial Ryft RBX10 - Fuel Cell Receiver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After the fuel cell delete, this was the next logical step; an easy to access receiver case/box for your RBX10
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 510
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
After the fuel cell delete, this was the next logical step; an easy to access receiver case/box for your RBX10 Ryft. Lots of room for extra wires or difference receiver models.
You'll need the rubber grommet from your original receiver case and 4 x M3x12mm (or up to 18mm) Socket head screws to complete this model. You can also use extended screws for the mount towards the front of the Ryft.
Updated: 11/11/21
Updated lid with bigger cutouts for the top bolts; should fit better for most people now.
Notes:
Supports are needed; watch out that supports don't go all the way through the rear screw-in; it'll be really hard to get out later. Print as supplied.