Axial Ryft RBX10 - Fuel Cell Receiver
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After the fuel cell delete, this was the next logical step; an easy to access receiver case/box for your RBX10
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 56
- Makes
- 0
- Views
- 510
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
After the fuel cell delete, this was the next logical step; an easy to access receiver case/box for your RBX10 Ryft. Lots of room for extra wires or difference receiver models.
You'll need the rubber grommet from your original receiver case and 4 x M3x12mm (or up to 18mm) Socket head screws to complete this model. You can also use extended screws for the mount towards the front of the Ryft.
Updated: 11/11/21
Updated lid with bigger cutouts for the top bolts; should fit better for most people now.
Notes:
Supports are needed; watch out that supports don't go all the way through the rear screw-in; it'll be really hard to get out later. Print as supplied.