Pittsburgh T-Handle Hex Key Set hanger for Skadis with T-Nut mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hang T-Handle Hex Keys on Skadis board with M3 T-Nut
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 102
- Wydruki
- 2
- Wyświetlenia
- 640
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
My take on on the best way to hang my t-handled hex keys, in two segments. The smaller wrenches 2mm-4.5mm on one rack, the 5mm-10mm on another. Balances use of X,Y,Z volume and for my purposes, enables me to have the ones I need close and the rest in storage where they are rarely used.
Might work for other hex keys but I have the harbor freight specials.
Uses the M3 T-Nut models by @contrapuntal, here https://www.printables.com/model/302296-m3-t-nut-for-ikea-skadis-pegboard-using-brass-stan if you require M2/M2.5 I suggest printing a cylindrical spacer of your own design 3mm tall or maybe some washers.
Shout out to @6d6178 this uses Alignment Guide 2.5 from his original Skadis T-Nut project, modified to use M3 bolts.
Currently metric only. I think I may have access to an SAE set, if so I will update once I can print it and try it out.
Print however you like. I did PETG with 15% gyroid infill. STLs pre-oriented for best (IMO) result.