1 / 2
ZimaCube Pro CPU Fan Shroud (Silverstone AR09-115XS)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fan shroud for the ZimaCube Pro with a Silverstone AR09-115XS
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 573
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (10)Powiązane
You definetly want to print this out of some more high temp material like ABS or ASA.
It uses 4 5x3mm Magnets to secure it to the front but i will hold pretty tight even without the magnets.
The area around the internal usb port has a little bit of room to fit a Samsung Fit Plus USB drive. Bigger USB drives will not work.
With the fan shroud installed my cpu temps dropped around 6°C at 85% CPU load.
Works with Nvidia RTX A2000 and ASRock Intel ARC A380 LP.
