Remix 10in Home Server Project Larger Rack Side Panel Remix for Qidi Q1 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added 18mm chamfer on the corners to allow it to print on the Qidi Q1 Pro build plate (245mm x 245mm)
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 1246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is exactly the same as the original model except I added an 18mm chamfer to the corners to allow it to fit onto the Qidi Q1 Pro build plate (245mm x 245mm). I printed this on the Q1 Pro in Elegoo ASA. The rest of the rack in the picture is printed in Esun PLA+, so you should be able to print this part in PLA as well. The part doesn't require supports or anything. I printed with 4 walls, 40% grid infill, .2 layer height, .4 line width. Probably overkill. Could probably get away with 25%.
Disclaimer: I have zero CAD skills. I just fumbled through this and kept adjusting the chamfer, exporting the stl and seeing if it fit until it worked. Here's the link to the model in Onshape. This is almost certainly not the best way of doing this, but it does work.
https://cad.onshape.com/documents/4459b204ba8292fa58dadab1/w/b62de4cd096e783ab7deeba7/e/cd16a95f85784443a379d3c9