1 / 9
IKEA Korken Hygrometer and Boveda holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for a hygrometer and a 8g Boveda package in the lid of IKEA Korken jars
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to have a clean solution to hold a hygrometer and a boveda pack for my IKEA Korken jars. This solution fits completely into the lid and doesn't stick out. It requires around 3-4g filament to print both parts.
I use the 1L Korken Jars with 8g Boveda packs and this cheap hygrometer (Color: FY-11 No Cable) from aliexpress.
Dimensions of the hygrometer are around 45x25x15mm.
Print recommendation:
- use ABS (PLA didn't bend well)
- 0.3mm Layer Height
- print it solid (it's just 1.2mm thick)
Installation steps:
- (Optional) Take the lid of the jar
- Lay your hygrometer face down into the lid
- Insert one side of the hygrometer holder into the lid so that the “bunny ears” reach into the groove
- Now with both hands take the other two “bunny ears”, bend the complete holder a bit and put the “bunny ears” into the groove
- press down the holder to the hygrometer so it snaps in
- Take your Boveda package and arrange it over the hygrometer as shown on the pictures
- Insert the Boveda package holder 90° rotated to the hygrometer holder
- (Optional) if you removed the lid you can mount it now