1 / 2
Pasta Guitar
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool used for making fetticuni pasta
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 462
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
How to use a pasta guitar:
Note: The person in that video is being a bit weird with it. Just strum the strings like a guitar & all the pasta will immediately fall down.
What you'll need to make my pasta guitar:
- Length of 1"x4" wood
- 2x of the STL found in this listing
- Optional: 4x [Pasta Guitar Wood Peg.stl]
Assembly:
- Print 2x [Pasta Guitar V3.stl]
- Optional: Print 4x [Pasta Guitar Wood Peg.stl]
- Cut 2 lengths of your 1x4 to whatever length you want for your noodles. 14in should be fine.
- Slide the 1x4's into the slots on the STL you may need to shave/trim the wood to make it fit. I just measured a random 1x4 I had in my shed for size (the slots are 18mm x 88mm).
- Drill the holes found in the STL using a 1/4in bit.
- Either secure the 1x4's using screws or tap in the pegs you printed using a hammer
- String the pasta guitar with some fishing line.
- You're done