1 / 2
Opel Mokka 2015 headlight washer cap in TPU.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Opel Mokka 2015 headlight washer cap, TPU.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 225
- Wydruki
- 2
- Wyświetlenia
- 973
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (23)Powiązane
I lost one of my headlight washer caps, so I made new ones printed in TPU matte 95a. Left and right are adjusted separately for a good fit. To fit them on the washers just pull the washer out firmly and set the new cap in place. I printed mine in black TPU. These will be probably too stiff to fit if you use PLA or PETG, so use TPU only.