1 / 2
Offset UHP-200 PSU DIN Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to have a dedicated 5v supply and relay control of the 24v supply in my Voron 2.4. In order to make room, I switched to a UHP-200-24. This bracket mounts the PSU offset from the DIN centerline, making it possible to use other similar offset brackets to mount other hardware next to it.
You'll need 4 standard M3 brass inserts. I inserted them from the bottom so that they would resist pulling out on tightening.
I used these in combination with these other offset brackets to mount 3 devices in the space of the old LRS-200 supply: