Jib Furler / Fockroller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for broken disk
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 510
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Replacement part of a Jib furler
As you can see from the picture, the old one broke.
You will need to duplicate the part and then mirror the duplicate. Print both parts.
The radial (half-)hole has no thread. Consider tapping that when both parts are screwed together or screwing the parts together while a heated screw is placed in the radial hole to form the thread.
Print with your strongest printer settings.
These are the dimensions:
Outer diameter 75mm
Disk thickness_outer rim 3.7mm
Inner cylinder height 10.6
wall_thickness_inner_cylinder 7.7mm
Bore 17mm
half thread 6mm
Rib_bottom_inside_5mm
→ All parameters in Onshape.
Can be remixed or edited here: Onshape Jib Furler
If you have no clue what this might be, but you are curious, give me a like for this model and have a read here :) https://en.wikipedia.org/wiki/Roller_furling