1 / 1
Unifi G4 Doorbell Pro Side-Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side mount for G4 Doorbell Pro, if your wiring is on the side of the door/window frame.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 831
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (20)Powiązane
My wiring was beside my door, so I needed a side mount for my G4 Doorbell Pro.
- You'll need 2 m4 x 40mm bolts to attach the print to the backplate that comes with your G4 Doorbell. Attach the backplate prior to screwing the print to the wall.
- You'll need 3" screws for screwing the print to the wall.
Print with organic supports. You might need to drill out the horizontal screw holes to clear out the internal supports.