1 / 5
Speaker Amplifier for iPhone 14 Pro Max with Mous Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small and sleek speaker amplifier for the iPhone 14 Pro max with Mous Case
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 952
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (13)Powiązane
I find it to help with directing sound towards me without turning up the volume super high. You can still use the phone FULLY. With the angle, your finger smoothly glides to the screen when swiping up to go home or the app switcher. Feel free to modify as you like just please credit when posting. The fitment could be a little tighter but in my testing, it holds good and snug. DO NOT HOLD THE PHONE ONLY BY THE PIECE IT COULD FALL OUT.
Requires:
- iPhone 14 Pro Max with Mous Case.
Print settings:
- Infill 10% (doesn't matter just have some kind of infill but it does not need to be solid).
- Layer height at 0.1mm for good overhangs.
- No supports are needed if you have good bridge settings!
- You should not need supports for the speaker holes at the top. Only for the side that sits against the speakers.
- A brim is required for reliable printing.
- Orient the model as shown below:
