1 / 3
Gmade Beadlock Spacers (5-Bolts)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gmade 5-Bolts Beadlock Spacers These are spacers you can bolt between the Hex Hub and Wheel to get more offset.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Gmade 5-Bolts Beadlock Spacers
These are spacers you can bolt between the Hex Hub and Wheel to get more offset.
- 2, 3 and 4mm spacers published, if you need a particular size i can custom make it for you but be aware you will need longer bolts for more than 4mm offset !
- I would recommend to put some grease or anti-seize compound inside the exposed threads left behing the Hex Hub to prevent rust.
- I think they MIGHT fit RC4WD wheels with 5 bolts too, but not the 6 bolts (duh)
- I also recommend you sand the top surface flat using sandpaper on a flat surface, so that the wheel doesn't wobble while rotating
Print instructions
Category: R/C Vehicles