1 / 3
Gmade Beadlock Spacers (5-Bolts)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gmade 5-Bolts Beadlock Spacers These are spacers you can bolt between the Hex Hub and Wheel to get more offset.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 46
- Makes
- 0
- Views
- 330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Gmade 5-Bolts Beadlock Spacers
These are spacers you can bolt between the Hex Hub and Wheel to get more offset.
- 2, 3 and 4mm spacers published, if you need a particular size i can custom make it for you but be aware you will need longer bolts for more than 4mm offset !
- I would recommend to put some grease or anti-seize compound inside the exposed threads left behing the Hex Hub to prevent rust.
- I think they MIGHT fit RC4WD wheels with 5 bolts too, but not the 6 bolts (duh)
- I also recommend you sand the top surface flat using sandpaper on a flat surface, so that the wheel doesn't wobble while rotating
Print instructions
Category: R/C Vehicles