Wera Tool Check 1/4" Zyklop Ratchet Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder to attach WERA Zyklop metal 1/4" ratchet to the back of the Toolcheck Plus No drilling in the Toolcheck…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Holder to attach WERA Zyklop metal 1/4" ratchet to the back of the Toolcheck Plus
No drilling in the Toolcheck required
The small bracket inside the Toolcheck has to be made out of a stiff material like ABS/ASA The ratchet holder has to be made out of a flexible material like TPU.
I used Polymaker Polylite ASA and Polyflex TPU 95A
You need following parts:
4 x Allen Screw M3x10 ISO 4762 4 x Nut M3 ISO 4032
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1 Pro
No
Supports:
Yes
Notes:
Print Settings:
Toolcheck Halterung:
Material: ABS/ASA
0.12 mm Layer Height
50% Infill
Number of walls: 3
Zyklop Metal 1 4 Halerung:
Material TPU (95A)
0.2 Layer Height
50% Infill
Number of walls: 4
Supports enabled
Category: Tool Holders & Boxes