1 / 5
Mini Fender for Onewheel XR with WTF Rails — zdjęcie 1
1 / 5

Mini Fender for Onewheel XR with WTF Rails

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

7,01 € – 8,57 € netto (bez VAT)

Dla pliku: xr-wtf-mini-fender_0.4n_0.2mm_PETG_MK3.5_6h15m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 7,79 € netto (środek widełek).

Masa podana przez autora
139 g
Czas druku podany przez autora
6,24 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A small/split/half fender for the Onewheel XR with Floatlife WTF rails.

Ocena
5 / 5
Polubienia
14
Pobrania
158
Wydruki
2
Wyświetlenia
883
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

There are plenty of fenders out there for the Onewheel XR, but not that many for aftermarket rails like the Floatlife Varials. Here is my version of a mini fender for WTF rails. Check out my Onewheel Collection – I have also designed a mini fender for the XR with straight/stock rails, a mini fender for the Pint and other Onewheel related stuff.

 

Spacers

In addition to the fender itself, you need to print some spacers. The height of the spacers depends on the height of your grip tape, footpad and rail guards. Measure the space between the footpad and the rail (front and back) and scale/cut the spacers in your slicer or modify the STEP file in your CAD program. The spacers have a 1.6 mm high rabbet that must face down when you mount the fender (it just stops the spacers from rotating). Make sure you mirror the spacers before printing, since they are not symmetrical. The spacers that you find in the 3mf file are already mirrored.

 

Printing Info

I recommend printing with PETG or a material with an even better layer adhesion and impact resistance. Print the bottom part of the fender with 100% infill. Check out the 3mf file to see my modifiers and settings. You can mount this fender with the screws you might have from the original fender. Otherwise, you need to get 4 M5 x 20 mm countersunk screws.

 

Happy printing and onewheeling!

Tagi