1 / 1
Crankshaft Degree Wheel with hub for 4G63
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used on my 98' Talon, this is a degree wheel used in conjunction with piston stop and dial indicator to set camshafts.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 249
- Wydruki
- 0
- Wyświetlenia
- 1121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
360 degree wheel. Bolts onto either the harmonic balancer in car of a 4G63 or the crank sprocket using the harmonic balancer bolts. To install, attatch the hub to the car, then slide up the wheel and align it to the hub. Using 2 interior trim screws from your car (that you obviously didn't put back in. Oops.) attach the wheel to the hub.
Piston stop is available in my other prints.
Follow this guys tutorial: