1 / 7
Mag Bumpers and Jigs for Wilson 9mm 1911 Magazines — zdjęcie 1
1 / 7

Mag Bumpers and Jigs for Wilson 9mm 1911 Magazines

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Wilson 10rd 1911 magazines I bought have a solid aluminum base and I wanted to add some TPU bumpers.

Ocena
0 / 5
Polubienia
6
Pobrania
45
Wydruki
0
Wyświetlenia
386
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to add some TPU magazine bumpers to my Wilson 10 round 9mm 1911 magazines.  The base plate did not have any screw holes, so I also made a jig to mark and drill them.

 

The marking jig uses a 6mm transfer punch to mark the hole centers. If you need another size for your transfer punch, the .f3d file is attached.

 

The 4-40 screws used to attach the bumper to the magazine baseplate came from Amazon, as did the drill bit and tap.

 

There is also a model for an enhanced bumper with extra cushioning beads on the base.

Tagi