Mag Bumpers and Jigs for Wilson 9mm 1911 Magazines
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Wilson 10rd 1911 magazines I bought have a solid aluminum base and I wanted to add some TPU bumpers.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 45
- Makes
- 0
- Views
- 387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to add some TPU magazine bumpers to my Wilson 10 round 9mm 1911 magazines. The base plate did not have any screw holes, so I also made a jig to mark and drill them.
The marking jig uses a 6mm transfer punch to mark the hole centers. If you need another size for your transfer punch, the .f3d file is attached.
The 4-40 screws used to attach the bumper to the magazine baseplate came from Amazon, as did the drill bit and tap.
There is also a model for an enhanced bumper with extra cushioning beads on the base.