Netgear GS305v3 Rack Mount (10" or 19")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Netgear GS305v3 10" or 19" server rack mount
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 652
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
Theres the STL and the Ondsel file, i printed it at 100% and it worked ok, Only change i made after print was add a 1mm fillet on the recepticle to make it stronger but its manly aesthetic.
Use a Brim, the side where there is no holes tends to warp with PLA, i waited for the print to finish and held down the edges while it was cooling off, fixed 99% of the warping
There is 2 pairs, one is for mounting on the right side of the U unit and one for the left, the Right-Side in the name signifies where the switch would be so the "Right-Side" variant mounts on the LEFT and the regular one on the RIGHT
There is also a image i made to use and reference when modeling