Flying wing (highly experimental)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very experimental project of mine (i haven't printed this yet) you can only hope everything prints correctly.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is a very experimental project of mine (i haven't printed this yet) you can only hope everything prints correctly, when assembled it will look like just one wing, although this is meant to be a flying wing. Right now I am unsure of it's flight characteristics. Also this doesn't have any slots for electronics feel free to remix because I likely won't revisit this model. And yes i did put wonky supports on the bottom of the hull. Not only this but the model is very small so if you have any plans for it probably make it bigger. Dimensions: base diameter of (95.25 mm x 97 mm) with a height of (107 mm)