1 / 4
Adapter for Fume Extractor Hose (2.5" or 65mm) to Window Exhaust (Dryer Vent Size 4" or 100mm) — zdjęcie 1
1 / 4

Adapter for Fume Extractor Hose (2.5" or 65mm) to Window Exhaust (Dryer Vent Size 4" or 100mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to connect a 2.5" (65mm OD) exhaust port to a 4" (100mm) window exhaust hole.

Ocena
5 / 5
Polubienia
16
Pobrania
175
Wydruki
0
Wyświetlenia
1934
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Included * .stl and *. step file for your convenience. 

I bought this hose: https://www.amazon.com/gp/product/B0CJR27PVT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

and this window exhaust kit: https://www.amazon.com/gp/product/B0C8NDR8SM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

There is a 4mm lip to feed the adapter through the window exhaust hole.

The 65mm end from the hose kit fits inside the adapter. 0.15mm built in for tolerance

Seal the 65mm end w/ silicon or adhesive. Seal the backside of the 100mm end with tape. The 100mm directly vents outside. I have a separate screen,  so I didn't print a screen opening on the bottom.

 

Printed with PETG, no supports. 

Tagi