Adapter for Fume Extractor Hose (2.5" or 65mm) to Window Exhaust (Dryer Vent Size 4" or 100mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to connect a 2.5" (65mm OD) exhaust port to a 4" (100mm) window exhaust hole.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 175
- Makes
- 0
- Views
- 1,934
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Included * .stl and *. step file for your convenience.
I bought this hose: https://www.amazon.com/gp/product/B0CJR27PVT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
and this window exhaust kit: https://www.amazon.com/gp/product/B0C8NDR8SM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
There is a 4mm lip to feed the adapter through the window exhaust hole.
The 65mm end from the hose kit fits inside the adapter. 0.15mm built in for tolerance
Seal the 65mm end w/ silicon or adhesive. Seal the backside of the 100mm end with tape. The 100mm directly vents outside. I have a separate screen, so I didn't print a screen opening on the bottom.
Printed with PETG, no supports.