BTT Pad7 - Extrusion Rail Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for my Ender 5 Plus but should work on all extrusion rails
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a mount for the BTT Pad 7 that incorporates a base (see https://www.printables.com/model/828776-bigtreetech-pad7-mount OR https://www.printables.com/model/785294-bigtreetech-pad7-mount) that I made - but since I moved around things in my print room - I needed a new mount - so I designed a base plate that incorporates the existing back plate and mounts directly to the extrusion rails!
I modified the previous base mounts to include a hole thru the leg to get access to tighten or loosen the extrusion nuts.
I used the regular t-slot nuts and a M4x10 screw. It is a little tight, but once you get the slot nut to slide properly - it will secure nicely.
Recommend setting the extrusion rail base first - then apply some super glue to fasten the BTT Pad7 mount to the extrusion base.
Printed with 3 walls, 20% Cubic, organic supports on.