BTT Pad7 - Extrusion Rail Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is for my Ender 5 Plus but should work on all extrusion rails
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 88
- Makes
- 0
- Views
- 432
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a mount for the BTT Pad 7 that incorporates a base (see https://www.printables.com/model/828776-bigtreetech-pad7-mount OR https://www.printables.com/model/785294-bigtreetech-pad7-mount) that I made - but since I moved around things in my print room - I needed a new mount - so I designed a base plate that incorporates the existing back plate and mounts directly to the extrusion rails!
I modified the previous base mounts to include a hole thru the leg to get access to tighten or loosen the extrusion nuts.
I used the regular t-slot nuts and a M4x10 screw. It is a little tight, but once you get the slot nut to slide properly - it will secure nicely.
Recommend setting the extrusion rail base first - then apply some super glue to fasten the BTT Pad7 mount to the extrusion base.
Printed with 3 walls, 20% Cubic, organic supports on.