1 / 10
Vertical Monitor Stand Viewsonic and Universal — zdjęcie 1
1 / 10

Vertical Monitor Stand Viewsonic and Universal

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

One way adjustable vertical monitor stand

Ocena
0 / 5
Polubienia
5
Pobrania
25
Wydruki
0
Wyświetlenia
515
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

This is a one way adjustable stand made specifically for a ViewSonic VA2419-SH base plate, HOWEVER you could a sheet of any material and drill holes for m5 screws to pass through, with a 32.75 center to center spacing. The stand supports any size of monitor as long as it has a VESA mount and also as long as you make the 30mm pipe long enough.

Needed Materials:

  • 30mm Pipe x1
  • m4 * 8mm socket head x6
  • m4 washers x6
  • m3 * 12mm socket head x2
  • m3 * 16mm socket head x1
  • m3 * 6mm heatset insert x2
  • m3 * 8mm heatset insert x1
  • m5 * 20mm x1 
    • any type, unless using ViewSonic baseplate, then use a pan head

Material and Settings:

I recommend petg or better just because you don't want it dropping your monitor

Printed with 5 perimeters and 15% infill

Print orientations are in the pictures, regarding the file “Vesa plate” no support is needed in this orientation as the design has support designed in.

Tagi