Vertical Monitor Stand Viewsonic and Universal
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One way adjustable vertical monitor stand
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 25
- Makes
- 0
- Views
- 515
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
This is a one way adjustable stand made specifically for a ViewSonic VA2419-SH base plate, HOWEVER you could a sheet of any material and drill holes for m5 screws to pass through, with a 32.75 center to center spacing. The stand supports any size of monitor as long as it has a VESA mount and also as long as you make the 30mm pipe long enough.
Needed Materials:
- 30mm Pipe x1
- m4 * 8mm socket head x6
- m4 washers x6
- m3 * 12mm socket head x2
- m3 * 16mm socket head x1
- m3 * 6mm heatset insert x2
- m3 * 8mm heatset insert x1
- m5 * 20mm x1
- any type, unless using ViewSonic baseplate, then use a pan head
Material and Settings:
I recommend petg or better just because you don't want it dropping your monitor
Printed with 5 perimeters and 15% infill
Print orientations are in the pictures, regarding the file “Vesa plate” no support is needed in this orientation as the design has support designed in.
