Double Sided Organizer Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple inserts for the double-sided 34-compartment small parts organizers on amazon.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple inserts for the double-sided 34-compartment small parts organizers on amazon. I used this to divide a few compartments to organize some very small ceramic capacitors and a few different types of LEDs.
Each insert has a label and there is a lid to put over the top of the compartment to keep in really small components.
Note: these inserts were designed only for the middle 6 compartments of the organizer. They will still fit along some of the edges, but may not stack well.
Printing Instructions (Standard):
I used 0.25mm layer height, 10% infill, and 2 walls. Print using the orientations provided.
What to Print:
Each compartment is about 34-36mm tall, so I have designed inserts of various heights to be stacked on top of each other in a single compartment.
For one compartment:
- two 17.5mm inserts
- one 14mm and two 10mm inserts
Find more of my organization prints in this collection!
Leave a comment if you have a specific request for the divider layout or height of the insert.
Happy Printing!