Laser Pistol - Star Trek the Original Series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Articulated, pretty accurate depiction, multi-piece, model of the Laser Pistols used on the TV series, Star Trek.
- Ocena
- 4,8 / 5
- Polubienia
- 67
- Pobrania
- 338
- Wydruki
- 5
- Wyświetlenia
- 1155
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
When I was a kid, Star Trek was my favorite show. My 3D printer is as close to a replicator as I'll see in my lifetime, so I decided to get into it and design a comprehensive Laser Pistol as was used in a few of the first episodes of the program.
The Laser Pistol was the predecessor to the Phaser. Apparently, the show adopted the phaser because a technical consultant said lasers couldn't do what Roddenberry wanted them to do.
The trigger works (with a standard spring from a cheap pen,) the muzzle rotates, the barrel is hollow and screws into the receiver to allow the addition of electronics. It's pretty cool, if I say so myself. :)
The parts are oriented as I printed them I used a brim on the trigger, but other than that, it should print pretty well.
The “frog” is the thing that'd let you hang it on a belt. If you wanted to use it, you'll need (2) 20x3mm round magnets and (4) 20x5x2 rectangular magnets. If you want a display model, I included dummy magnets you can print.
Assembly should be pretty straightforward. Non-moving parts are intended to be glued together. The middle ring should be glued to the barrel.
In the spirit of Star Trek, I provide this model for free. It is my fondest wish it gets enjoyed by a wide audience.