1 / 1
Replica of Anasazi Flute A-14450 from the Broken Flute Cave — zdjęcie 1

Replica of Anasazi Flute A-14450 from the Broken Flute Cave

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replica of one of the Anasazi flutes found in the Broken Flute Cave, specifically flute A-13994-A.

Ocena
0 / 5
Polubienia
12
Pobrania
77
Wydruki
0
Wyświetlenia
571
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replica of the Anasazi flute A-14450 from the Broken Flute Cave using the measurements given on Flutopedia.

It is broken into segments to fit within the build volume. Printing the segment with the long axis oriented vertically should give the best dimenstional accuracy. Use a brim or raft to ensure the segments stay firmly attached to the build plate. The segments are designed using annular snap joints for easy assembly. I printed this model out of PETG. The joints may not work as well with other filaments due to changes in rigidity and friction.

Gaskets have been added to ensure the flute is fully airtight. The use of gaskets instead of glue allows the flute to be disassembled for storage or transport. The space for the gaskets has an inner diameter of 21.7 mm and outer diameter of 24.5 mm and a thickness of 0.6 mm. I printed the gaskets out of TPU using the same inner and outer diameter but with a thickness of 1 mm.

If you want the size of the finger holes to be as close as possible to the dimensions listed on flutopedia, I suggest using a file and calipers to adjust them. While the model matches the listed dimensions exactly, their dimensions when printed will likely be close but not perfect.

The included CAD model was made using Ondsel which is an open-core company built around the FreeCAD project founded by a long-time FreeCAD contributor Brad Collette.

Tagi