print in place air engine (no suport, no assembly)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i have created this 1cc print in place airengine. it can be printed in under 2 houres without suport.
- Ocena
- 4,333 / 5
- Polubienia
- 75
- Pobrania
- 1995
- Wydruki
- 10
- Wyświetlenia
- 8583
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
I've been working on this engine for quite some time. it is a bit hard to print since the tolerances need to be quite tight. it can be a little hard to break free so have some pasient and a well-tuned machine will help. it can be printed in just under 2 hours!
you will need to print this at a 0.2mm layer hight or lower and at about 30% infil. it is necersary to print with 2 layer raft.
when printed try lubricating it with vegtable oil before breaking it free. after words put on a lego flywheel and use the compressor on the fly wheel to get it up to speed. this will smothen the engine.
i have only tried to print this on my own printer a ender 3 v2 and my fiend witch also have a ender 3 and i got it to work let me know your experiance.