print in place air engine (no suport, no assembly)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
i have created this 1cc print in place airengine. it can be printed in under 2 houres without suport.
- Rating
- 4.333 / 5
- Likes
- 75
- Downloads
- 1,995
- Makes
- 10
- Views
- 8,583
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial
I've been working on this engine for quite some time. it is a bit hard to print since the tolerances need to be quite tight. it can be a little hard to break free so have some pasient and a well-tuned machine will help. it can be printed in just under 2 hours!
you will need to print this at a 0.2mm layer hight or lower and at about 30% infil. it is necersary to print with 2 layer raft.
when printed try lubricating it with vegtable oil before breaking it free. after words put on a lego flywheel and use the compressor on the fly wheel to get it up to speed. this will smothen the engine.
i have only tried to print this on my own printer a ender 3 v2 and my fiend witch also have a ender 3 and i got it to work let me know your experiance.